Scientech H410 Vector Manuel d'utilisateur télécharger pdf (Page 2)

Thank you for choosing a Scientech laser power and energy meter. Scientech, an ISO 9001 registered

company, and our employees are pleased to provide you with a product designed for years of reliable service.

Please read this manual completely before using your indicator. This information will enable you to fully

utilize the equipment and should be located nearby for reference. The indicator is intended to be used only in

the manner outlined in this manual. Misuse of the equipment may cause product failure.

Note: The Models H410 and H410D are identical to each other in every respect except the analog meter. The

H410 has both an analog and digital display. The H410D has only a digital readout. All references to the H410

are intended to include the H410D except where noted. Also the words "indicator" and "meter" are

synonymous.

DETECTOR OPERATING PARAMETERS:

Note: All detectors are calibrated at a specific wavelength and the detector’s operating

parameters are derived for that wavelength. This information is recorded below and on

the detector’s serial tag. When a detector is used at a wavelength other than the

calibration wavelength some of the operating parameters may need to be adjusted. For

specific instructions please refer to the Operating Procedures section for the type of

detector you are using.

Calorimeter 1: Calorimeter 2:

Model No: ___________ Model No: __________

Serial No: ___________ Serial No: __________

Calibration Wavelength ___________nm Calibration Wavelength: __________nm

Output Sensitivity (S): ___________V/W Output Sensitivity (S): __________V/W

Time Constant (1/e): ___________sec. Time Constant (1/e): __________sec.

Calibration Temp: ___________°C Calibration Temp: __________°C

Sub. Heater Resistance (R

): ___________ohms Sub. Heater Resistance (R

): __________ohms

Sub. Heater Voltage (V

): ___________volts Sub. Heater Voltage (V

): __________volts

Sub. Heater Wattage (W

) ___________watts Sub. Heater Wattage (W

): __________watts

Pyroelectric Detector 1:

Model No: __________

Serial No: __________

Calibration Wavelength: __________nm or µm

Output Sensitivity: __________V/J or __________V/mJ S_________ I__________ L_________

Calibration Temp: __________°C

Pyroelectric Detector 2:

Model No: __________

Serial No: __________

Calibration Wavelength: __________nm or µm

Output Sensitivity: __________V/J or __________V/mJ S_________ I_________ L__________

Calibration Temp: __________°C

Photodiode Detector 1: Photodiode Detector 2:

Model No: __________ Model No: __________

Serial No: __________ Serial No: __________

Calibration wavelength __________nm or µm Calibration Wavelength __________nm or µm

Output Sensitivity __________V/W Output Sensitivity __________V/W

Calibration Temp: __________°C Calibration Temp: __________°C

1 2 3 4 5 6 7 ... 45 46

Commentaires sur ces manuels

Pas de commentaire

Scientech H410 Vector Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Scientech H410 Vector